TS ENGINEERING

Hi Andy / Ross

I would just like to finish off our order with an email to say how happy and impressed we are with you guys once again.

From the first initial email with an order of our Challenger 1250 Dry Blast cabinet to the delivery today has been very impressive.

We can’t fault you guys with every step of this process.

Build quality is still at the highly impressive standard it was when we purchased one of your new 1100 Wet blast cabinet 3 years ago.

We at TS Engineering have a high turnover of work in which your cabinets have never let us down. We can be rest assured we will have the same from this Dry Blaster.

We will no doubt speak soon as we order various blasting medias over the up and coming months from you guys. Something again is a service that has been nothing but 100%.

Once again, we can carry on our reliable service to our customers, in which RS Pro Finishes have a big part in.

Many thanks guys and please do pass on our thanks to rest of your guys and girls back at your workshop, a great team of people who all are pleasure  to deal with.

Best Regards

Simon Hogarth

Owner, TS ENGINEERING 

SILVER WHEELS

Chalk and Cheese.

Last year we made the decision to replace one of our stand alone shot blast units. Having had a previous disappointing experience, we researched online for a company with some positive feedback in the trade. RS Treatments came highly recommended.

We purchased a CHALLENGER II 1250 dry blast cabinet with a pressure pot.

This is what service is supposed to look like.
The equipment is a good solid build and has been faultless. Our other cabinet has not achieved this level of success.

Andy and the team kept me fully informed from placement of order to delivery. Everything arrived when it was supposed to and was installed professionally.
I genuinely couldn’t be happier. Once we find a company with this level of professionalism – we do not leave.
Suffice to say we won’t be going anywhere else for our shot blasting needs.

Thank you to everyone at RS Treatments. A really good job done well, Thank you.

Marcus Beck

OwnerSilver Wheels Ltd 

BIGFOOT CUSTOM AND BLASTING

After contacting RS pro finishers to discuss their Vapour blast cabinets and prices, I bit the bullet and ordered my first big purchase the Barracuda 1100s. what can I say, Covid lockdown happened, delivery was delayed on my side. Andy & Ross were brilliant and understanding,The day it arrived, Ross installed the unit showing me how to operate it and daily weekly Maintenance. Andy, Ross Thanks for the friendly advice on my first big job my call to you I was nervous (vapour blasting a stripped gt 250 engine) i will definitely be using you for future purchases your company build quality is superb (I am a fabricator myself) and your friendly manner to customers I have never came across before Thank you from Puggy & Bev (Bigfoot Custom & blasting) Ps if your down this way kettle is always on.

Gordon & Bev Mowat

Owners, BIGFOOT CUSTOMS 

MINISPRINT (Vienna, Austria)

We have been in classic car business for more than thirty years, mainly with restoring and selling classic Mini Coopers. In all that time, cleaning and preparing surfaces on various car parts was an unsolved issue. Different treatments were tried. Sandblasting, chemical cleaning, steam washing – but for different reasons, all with unsatisfying results.  Time consumption, destroyed surface structures and last but not least, harmfulness for health and environment was always a problem. On my frequent look out for new solutions, I finally found the equipment offered by RS Pro Finishes and after having first contact with Andy, we decided to purchase a Barracuda 1250. Now, after using it for 18 month we are still annoyed, that we didn’t find the wet blasting process years before;-) Now, all those nasty, rusty, rotten, classic car parts are transformed to “as new” or sometimes to “better than new” parts. The results speak for themselves and can be seen here www.perfectparts.at!

Thanks to Andy and the RS Pro Finishes machine!

Ronald Krausch
Owner Minisprint, Vienna/Austria

WARWICKSHIRE VAPOUR BLASTING

I recently had 2 machines from RS Pro Finishes Ltd

A Barracuda 1250 Wet Blaster

And a Challenger II 1250 Dry Blaster

Both machine are excellent.

From the first phone call, through to installation and after care  they have been brilliant and I can’t recommend them enough, it really is a pleasure to do business with them.

Thanks to all at RS Pro Finishes with a special thanks to Ross and Andy for guidance along the way.

Mick Cuthbertson

OwnerWarwickshire-Vapour-Blasting

AB DYNAMICS LTD

We required an even finish on our components prior to Anodising and sent a number of samples to be blasted at RS Pro Finishes Ltd – These samples were processed under a number of different conditions and times. The processed parts together with a detailed analysis gave us the confidence to purchase a machine. From order placement, to delivery and commissioning, everything was handled professionally – We are very happy with our Wet Blast Machine.

Andy Newman

Workshop ManagerAB Dynamics Ltd

CYBER TECHNOLOGIES (South Africa)

RS Pro Finishes Ltd… I had come across their website whilst browsing on google for vapour blasters, I had already made enquiries with other Vapour Blasting machine suppliers in USA and UK and was just about to place my order.

I`m so glad that I found their website that day, from the moment I first emailed and got a very prompt response from Andy to the many many emails thereafter with my hundred and one questions we ordered the machine.

We were a bit sceptical at first spending such a large amount of money with a company I found on the internet which are on the other side of the planet but everything checked out. Once the machine had arrived, you could clearly see the quality materials used and design which has been very thought out. Whenever we had a question, Andy was just a email away. The finish that the Barracuda 1100 produces is unbelievable, from the very start our machine has produced a better finish than any of my competitors in South Africa which is what we wanted to produce, QUALITY. I highly recommend RS Pro Finishes for your next Vapour Blaster.

Andrew Robertson

OwnerCyber Technologies, South Africa

KERLOCH OIL TOOLS

RS Pro Finishes Ltd supplied Kerloch oil tools with the challenger 1250 bead blast unit. This was installed by Ross, who set up the machine and modified to our specifications. Ross also conducted training for our staff to enable us to bead blast pipe connections to achieve VAM standards TSLI 385. Before leaving he made sure we were happy with the setup of the machine and the quality of the bead blast on our connections. From purchase order raised to installation the customer service from RS Pro Finishes has been brilliant. They also supplied us with free equipment and spares to get us up and running. Would highly recommend using RS Pro Finishes as they have great service and great equipment.

David Hedley

Maintenance TechnicianKerloch Oil Tools

SPHERIC TRAFALGAR LTD

We as a company had been looking for some time for a wet blast cabinet, we found RS Treatments Ltd on the internet.
I contacted them and spoke to Andy.
I wanted to test the machine out to make sure it could achieve what we as a customer needed.
There was no issues with this and we arranged a time and date.
On my visit to RS Pro Finishes Andy run me through the setting and I managed to spend about an hour testing the machine. The RS machine is nice and compact and at a very good price compared to some other machine I look at on the internet .

I would recommend RS Pro Finishes to other customers.

Gary Beadell

BUSINESS DEVELOPMENT MANAGER, SPHERIC TRAFALGAR LTD

NOV WELLBORE TECHNOLOGIES

We at NOV Wellsite Services are delighted with our new Dry Blast Challenger Dry Blast cabinet from RS Pro Finishes, the blaster is clean, efficient and easy to use.

Good visibility due to the LED lighting and large viewing window, easily accessible through the wide door and maintained with ease thanks to the filter system

Ross, Andy and the team were very helpful in demonstrating and advising on what system was suitable for our needs, also providing training and aftersales support’

Chris Mowatt

NOV Wellsite Services Refurbishment Team

NOV WELLBORE TECHNOLOGIES

BOILER RECYCLING LTD

Our company, which working in refurbishing boiler parts, have been looking for a sand blasting machine to clean small boiler parts and components. We found RS Pro Finishes and decided to get in touch with the them.
All experience from the start to finish was excellent. Great communication throughout all process, delivered on time, no chasing needed. Knowledgeable training provided when the machine was delivered, Ross was very professional, knew what he is talking about and answered all my questions.
The machine itself is outstanding quality, easy to use and giving the best quality of cleaning parts. We now can provide a better and quicker service to our customers.
I will be doing business with RS Pro Finishes again in the near future, thank you very much for all your help!!!

Giedrius Vaicikauskas

Boiler Recycling LTD

RSK 2STROKES

RS PRO FINISHES…. They are the whole package friendly helpful & understanding.
Andy guided me to the ideal machine for our requirements. We use it for our business Rsk 2strokes repairing & restoring motorbikes.
From start to finish it was stress free.
Our customers comments about the quality of finish on the items cleaned in the RS wet blast machine are all positive.
So a huge thank you to Andy & all at RS Pro Finishes, we will definitely be recommending you.
1st class !

Amanda Maddocks

Rsk 2strokes

RIEDLING & MOUSER 

Following our purchase from RS Pro Finishes we feel the need to highlight what a great experience it was, from start to finish.

The order process was simple, well advised and friendly.

Our machine was ready on time as promised.

We decided to collect personally and were met by a great team of guys who could not have been more helpful. We were taken through all aspects of the machine by one the team as well as being given a well-produced manual. All questions answered, our machine was then carefully packaged and loaded.

The machine has now been running well for the last month with no issues and great results. We have had a few questions along the way and had to order new media which again has been handled in a simple, effective and friendly manner.

Great company. 5 Star!

Phil Mouser

Owner RIEDLING & MOUSER (Classic Automobile Services)

T-MAN LIMITED

This is just a short note to say many thanks.

The machine was delivered and installed on the day agreed with the minimum of fuss (about 1 hour from arrival to departure) and to our delight, initial use of the machine has exceeded our already high expectations.

This investment represents a significant step forward for our business, which will bring down both labour and energy costs.

I would certainly recommend RS Pro Finishes as a first port of call for anyone with a similar blasting requirement.

James Tromans

DIRECTOR OF ENGINEERINGT MAN LIMITED

If you have any questions or you would like to discuss your options, Please Call 01609 258080 or Contact Us

RS Pro Finishes Ltd, Unit 5, Woodstock Close, Standard Way Industrial Park, Northallerton, North Yorkshire, DL6 2NB