WHAT YOU WILL NEED TO RUN AN RS PRO FINISHES DRY BLAST CABINET

AIR SUPPLY

 

  • The RS PRO FINISHES DRY blast Cabinet will be supplied with a half inch bsp male fitting and 3m of air pipe.
  • You will require a half inch bsp FEMALE fitting attached to your air supply. We can include a reducer to ½ inch with your machine if needed.
  • The air tap should be no more than 3m away from where the machine will be in suite.
  • The air line should not be restricted by smaller diameter fittings (push connectors).
  • Your compressor should have a dryer fitted and should be able to produce 18CFM to 30CFM

ELECTRICAL SUPPLY

You will need a 240v 3 pin blue socket.

  • The cabinet will be supplied with a single phase 240v Blue 3 pin plug attached.
× CLICK FOR MACHINE SUPPORT